Servo energy-saving injection molding machine 680TON
YJS680
Injection Weight(PS): 2661~3286g
Plasticizing Capacity(PS): 74~84g/s
Clamping force: 6800KN
Toggle stroke: 920mm
Tie bar space: 920x920mm
Servo motor power: 30KW+30KW
Heater power: 51KW
Machine dimension: 10.2x2.3x2.53m
YONGJIANG injection moulding machines have been exported to more than 35 countries.
The range of clamping force is from 100 ton to 3000 ton, and the range of injection weight is from 80g to 45000g.
Quantity
China leading Injection molding machine suppliers
YONGJIANG hydraulic Injection molding machine
What is the advantage of the servo motor rubber Injection molding equipment？
Compared to traditional hydraulic Injection molding machine, the servo motor rubber injection molding equipment is equipped with a high-performance servo variable speed power control system, which successfully achieves better automatic adjustment of the energy requirements of the hydraulic Injection molding machine, resulting in electricity savings of 30% to 80%. At the same time, the equipment significantly shortens the operating cycle of the system for servo motor rubber Injection molding equipment,and improves the productivity and reliability of the equipment, and extends the service life of the molding machine suppliers.
1.Faster response and higher accuracy. The servo motor of the YONGJIANG molding machine suppliers only takes 30ms to reach its rated speed from a standstill, and the repeatability of low-pressure and low-flow is ±0.5%, while avoiding the latency of a frequency conversion motor. Compared to traditional hydraulic Injection molding machine, its pressure flow speed response is only about 0.03s, which not only significantly improves the repeatability, but also achieves a positioning accuracy of within 0.1mm.
2. Shorter molding cycle and higher efficiency. Due to the use of a servo motor, the time required for each action of the servo motor rubber injection molding equipment to start and stop is reduced, and the elimination of the proportional valve reduces hydraulic leakage and increases speed.
3. Lower motor energy consumption. Compared to the efficiency of around 80% of traditional asynchronous motors, the efficiency of the servo motor of the same power in this hydraulic Injection molding machine can reach over 90%, which is more energy-saving for servo motor molding machine suppliers.YONGJIANG molding machine suppliers keep improving on this technology.
4. The current of traditional motors during startup is five times that during normal operation, but the YONGJIANG hydraulic injection molding machine adopts a soft start mode, and will not cause an impact on the power grid.
5.Water and oil conservation. The system is highly efficient, which can effectively avoid temperature rise of the oil and reduce the capacity of water cooling, and consequently reduce the replacement rate of hydraulic oil. Through tracking and investigation of some pipe manufacturers, it was found that the molding machine suppliers only needs to use cooling water for 10 to 20 days in summer, and the amount of cooling water used is only one-third that of traditional hydraulic Injection molding machine in a year.
6.Lower noise. The main source of noise from rubber Injection molding equipment is the power system. The power system composed of servo motors and gear pumps has very low noise due to its working characteristics, so servo motor rubber injection molding equipment equipped with this system are particularly quiet.
1.Faster response and higher accuracy. The servo motor of the YONGJIANG molding machine suppliers only takes 30ms to reach its rated speed from a standstill, and the repeatability of low-pressure and low-flow is ±0.5%, while avoiding the latency of a frequency conversion motor. Compared to traditional hydraulic Injection molding machine, its pressure flow speed response is only about 0.03s, which not only significantly improves the repeatability, but also achieves a positioning accuracy of within 0.1mm.
2. Shorter molding cycle and higher efficiency. Due to the use of a servo motor, the time required for each action of the servo motor rubber injection molding equipment to start and stop is reduced, and the elimination of the proportional valve reduces hydraulic leakage and increases speed.
3. Lower motor energy consumption. Compared to the efficiency of around 80% of traditional asynchronous motors, the efficiency of the servo motor of the same power in this hydraulic Injection molding machine can reach over 90%, which is more energy-saving for servo motor molding machine suppliers.YONGJIANG molding machine suppliers keep improving on this technology.
4. The current of traditional motors during startup is five times that during normal operation, but the YONGJIANG hydraulic injection molding machine adopts a soft start mode, and will not cause an impact on the power grid.
5.Water and oil conservation. The system is highly efficient, which can effectively avoid temperature rise of the oil and reduce the capacity of water cooling, and consequently reduce the replacement rate of hydraulic oil. Through tracking and investigation of some pipe manufacturers, it was found that the molding machine suppliers only needs to use cooling water for 10 to 20 days in summer, and the amount of cooling water used is only one-third that of traditional hydraulic Injection molding machine in a year.
6.Lower noise. The main source of noise from rubber Injection molding equipment is the power system. The power system composed of servo motors and gear pumps has very low noise due to its working characteristics, so servo motor rubber injection molding equipment equipped with this system are particularly quiet.
Welcome to YONGJIANG servo motor Injection molding machine suppliers, we are looking for sales Agent/Representative in Global Market.
hydraulic Injection molding Machine 680TON specification：
